For the last 2 years we have been working on a new line of freestyle boards.
The shapes are truely dedicated to high performance freestyle with short lengths to enhance pop and spinning around as easy as possible.
The Full Custom Biax Carbon construction is super light yet stronger than most production freestyle boards. This construction is custom build up from high grade, light weight unidirectional carbon so we can lay the fibres exactly into the direction of the most common forces. The fin boxes are our in in house made slot box type, molded directly into the board and using 4 screws to mount the fin. The new RTM fins weigh less then half of G10 fins. All boards come fitted with Pro Limit ergonomical straps.
With the introduction of the CNC system we have put through various minor changes, a deeper inverted V, adapted fin angles (by 0.1°), a slightly wider nose, straps a little closer together, and all lines and volumes have been recalculated by our shaping program. We have the same system in our R&D centre and custom board factory on Fuerteventura as well as the production board factory in Sofia, Bulgaria, to make sure what we design in Fuerte is the same board you can buy in shops.
TRI FIN
Early planing, upwind ability, manoeuvrability, drive, control at overpower. Higher average speed when you need it most. To give the highest performance.
SINGLE FIN
Slightly higher top speeds, old school lean back sailing.
Inverted V bottom shape
WIDE STANCE
Responsiveness, control and drive
medium pin tail.
PARABOLIC MEDIUM ROCKER
Good mix of early planing, tight turning, smoothest behaviour
PROGRESSIVE RAIL SHAPE
Manoeuvrability, speed, early planing, control, total grip, acceleration through the turn.
DROP SHAPE OUTLINE
Planing, control and manoeuverability
Volume |
||||||
|
Length |
||||||
|
Width |
||||||
|
Sail range |
||||||
|
SDT |
||||||
|
CBC |
||||||
|
HDD |
||||||
|